Pricing, other stuff
Van Dusen carbon spar, completely rigged, less mast step US$3,181.00
Boom, clear anodized aluminum,Johnson Boat Works M-16 & X section,completely rigged,sans blocks 390.00
Spreaders and spreader bases only, by Selden/Proctor, including stainless rivets 249.00
Foil rudders, each, aluminum shaft, 17.5" draft, carbon and epoxy blade, NACA 0012 section 375.00
Sprit, 8' x 2.25" ID, carbon fibre/epoxy by Van Dusen or Forte, bare 350.00
Sprit hood, handy for do-it-yourself asymmetrical conversion, glass and epoxy, unfinished 125.00
Sprit, 6061T6 aluminum, now legal in the I-20 for low cost asymmetrical conversions 100.00
8' x 2.25" ID/2.50" OD, .125" wall. From www.onlinemetals.com.
8' x 2.25" ID/2.50" OD, .125" wall. From www.onlinemetals.com.
Rudderhead, adapts round 1 inch rudder shaft to 1-1/2 inch tiller 'C' channel 50.00
Trailer, aluminum 2,200.00
Flotation panels, per set, includes zipper side for mainsail 150.00
Ronstan RF3133 Battlestick Urethane Universal Joint 9.96
3mm Dyneema single braid rope, UHMWPE (Ultra High Molecular Weight Polyethylene) by Ronstan/Robline, this is the Dutch State Mines fibre (along with AlliedSignal's Spectra) that revolutionized sailboat running rigging. Available in full 200 metre spools, or by cut length; per foot .41
6mm polyester double braid rope, sometimes referred to by the DuPont tradename of 'Dacron'. 6mm is a scant 1/4 inch. Available in 200 metre spools, or by cut length, per foot .60